Skip to content
(512) 402-3104
Hook EMHVAC
Two new condensers on a shared pad after a double changeout in Austin, TX

Austin, Texas HVAC · Repairs & new installs

Austin AC repair and HVAC installation

AC not cooling? We diagnose the problem and quote the repair before work starts. Service calls are $99 after diagnosis. New systems start at $8,800, with free install consultations.

(512) 402-3104
AC repair pricing & service details →Read our Google reviews (opens in a new tab)
FreeSmart Home Package with a new system, or ask about Elite. Ends November 11.
$99Service call, waived with a repair over $400 or a replacement done that visit.
FreeSecond opinion on HVAC installs. Already have a quote? We'll look it over.
Service call
$99
Full system from
$8,800
Consult
Free
Two new condensers set on a shared pad after a double system changeout at a Central Texas stone home
Double changeout
Full system changeout at an Austin limestone home — new Trane condenser set and the second unit on gauges
System changeout
New Trane condenser set on a pad against a flagstone wall in Austin, TX
New system

Limited time · Two ways to upgrade

Option 1 · Smart Home

Free Smart Home Packagewith a new system

from$8,800

or $137/month with approved credit

  • Complete system up to 3.5 tons — furnace, coil and condenser
  • Google Nest Thermostat
  • Google Nest Doorbell

$1,500 in upgrades included

See the offerEnds November 11

Option 2 · Elite

Elite PackageCleaner, healthier air

$13,500

or $210/month with approved credit

  • New plenum
  • Whole-home UV air purification
  • Variable-speed, high-efficiency system up to 3.5 tons
  • Free Smart Home Package

$4,900 in upgrades included

See EliteEnds November 11

On new full-system installs. Consults are free. TACLA00168968C.

The Hook EM Difference

Every new install. The right way. Every time.

Five points. No shortcuts. This is how we set a system — not how we write a brochure.

Hook EM Difference: sealed ductwork, full system flush, deep vacuum, three safety switches, and a multi-point installation checklist

  • Ductwork sealed to factory specs

    No energy-wasting leaks. Sealed the way the equipment was designed to run.

  • Full system flush on every install

    Clears old oil and gunk others leave behind in the lineset.

  • Deep vacuum every time

    Removes moisture — a top cause of early compressor failure.

  • 3 safety switches on every unit

    Triple protection most installers skip.

  • Multi-point installation checklist

    Verified before we leave. The job is not done until every point checks out.

HVAC services in Austin, TX

AC, heating, indoor air, and smart-home installs

Two new condensers set on a shared pad after a double changeout in Austin, TX

Air Conditioner Services

New Lennox furnace and evaporator coil installed together in an Austin attic, with flue, gas line and condensate pump

Heating Services

Hook EM technician commissioning a new system with a digital manifold

Related Services

Spanish Oaks · Bee Cave area

HVAC service for Spanish Oaks homeowners

AC repair, heating service, maintenance, and replacement consultations in Spanish Oaks. Tell us which rooms or systems need attention so we can plan your service visit.

Explore Spanish Oaks HVAC services →

Why Hook EM

Local Austin techs. Straight prices.

We diagnose first. Then we show you the unit, the lineset, and the number. No mystery fees.

  • Service call is $99 after diagnosis
  • Full system (furnace, coil, condenser) starts at $8,800
  • 1 year labor warranty on installs
  • 10 year manufacturer warranty on equipment
  • Free 1-hour new install consultation
Full system changeout at an Austin homeManifold gauges on a new Trane condenser during charge and startupNew Lennox furnace and evaporator coil installed in an Austin atticNew Trane condenser set on a pad in Austin, TX

The work

Residential and commercial HVAC work

Duct replacements, new systems and commercial rooftop installs — completed by our crew.

  • Two new condensers set on a shared pad after a double system changeout at a Central Texas stone home
    Double changeout
  • New Trane condenser set on a pad against a flagstone wall in Austin, TX
    New system
  • New Lennox furnace and evaporator coil installed together in an Austin attic, with flue, gas line and condensate pump
    Furnace & coil
  • Full system changeout at an Austin limestone home — new Trane condenser set and the second unit on gauges
    System changeout
  • Fieldpiece manifold gauges on a new Trane condenser during charge and startup on a new install
    New install startup
  • Old insulated ductwork removed from a residential home during a duct system replacement
    Old duct removal
  • New insulated ductwork installed through the attic trusses of a residential home
    New duct system
  • Crane lifting an HVAC unit above a commercial rooftop
    Commercial rooftop lift
  • Crane hoisting HVAC equipment beside a commercial building during installation
    Commercial HVAC install

Hook EM HVAC on Google

Read our Google reviews

See customer feedback, job photos, and business details on our Google profile. Already had a visit from us? You can share your experience there, too.

View reviews on Google (opens in a new tab)

Repairs

AC, furnace, and heat pump service across Austin and Central Texas.

New installs

The right way, every time. Systems from $8,800 in Austin, TX.

Warranties

1 year labor. 10 year manufacturer warranty on equipment.

HVAC service in Greater Austin, Texas

AC repair, heating repair, and new HVAC installs from downtown Austin to the northern and southern suburbs.

Austin neighborhoods

Austin ZIP codes we cover

78701 · 78702 · 78703 · 78704 · 78705 · 78721 · 78723 · 78731 · 78741 · 78744 · 78745 · 78746 · 78748 · 78749 · 78750 · 78753 · 78757 · 78758 · 78759

View all Austin HVAC service areas →

Austin HVAC questions

How much is an HVAC service call in Austin?
The service call fee is $99, due after the service technician has diagnosed the system.
How much does a new HVAC system cost in Austin, TX?
A lowest-tier full system — furnace, coil, and condenser — starts at $8,800. Final price depends on the home and equipment selected.
What is the Hook EM Difference on a new install?
Every new install includes ductwork sealed to factory specs, a full system flush, a deep vacuum, three safety switches, and a multi-point checklist verified before we leave.
Is a new install consultation free in Austin?
Yes. New install consultations are free and last about one hour.
What warranties do you offer on Austin installs?
Installs include a 1 year labor warranty and a 10 year manufacturer warranty on the equipment.
Do you offer indoor air quality and smart home controls?
Yes. Indoor air quality is part of what we do. The Smart Home package on a new install includes a Google Nest thermostat — control heat and cool from anywhere in the world — and a Google Nest doorbell, both set up in Google Home before we leave.
What areas of Austin and Central Texas do you serve?
We serve Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Leander, Kyle, Buda, Lakeway, Bee Cave, Manor, Hutto, Dripping Springs, and West Lake Hills — plus Austin neighborhoods from East Austin to Circle C.

Book it

Schedule a visit in Austin

Pick a service call or a free install consult. Choose a day and a 1-hour window. We’ll confirm by phone.

(512) 402-3104

Service call $99 after diagnosis · consults free

Book online

Pick a service call or a free install consult, choose a day and a 1-hour window, and we’ll confirm by phone.

  • Service call · $99, due after we have diagnosed the system.
  • New install consult · Free. About an hour at your home for a full-system quote.
Or call (512) 402-3104

Monday–Saturday, 8am–4pm Austin time. Same-day emergencies: call.

Ready for an install done the right way?

Call for a service visit or book a free 1-hour new-install consultation.

(512) 402-3104